Impala SS Cat-back Exhaust Systems



Impala SS Cat-back Exhaust Systems

Impala SS Cat-back Exhaust Systems 

The exhaust system is available in many configurations:.  2 1/2" or 3", aluminized steel or 304 stainless steel (coming soon), full race only systems with 3" ball/socket, (matches our Quad-1 headers, as shown above), or as a cat-back system from ANY headers available on the market. These systems will also work with the stock manifolds and catalytic converters.

We offer these complete kits with SpinTech mufflers exclusively. They have been a great company to work with and we have always loved the sound. Choice of Pro Shootout (Race mufflers), Pro Street or Street XL (street mufflers).

The exhaust system components are also available individually: Balance-pipe, muffler assembly, Over-axle pipes or tailpipes. The tailpipes were designed to give your car that custom look as our tips are visible from the side of the car where they follow the body line. They turn-down so as not to blacken trailers in tow.

However the turn-down is not pointing at the ground, as many systems do, so the resonance (drone) is greatly reduced. One other bonus to our tip design is the ground clearance they provide when driving your car up onto a trailer or pulling into a steep driveway. They are also available as mirror-polished 304 stainless steel.

Our over-axle design is like no other on the market. We chose to offer a design, which takes longer to manufacture, but offers better clearance than any other company.

We designed our  2 1/2" system with center in/center out so the customer can use any muffler on the market if they choose. However we offer the choice of either the Sportsman Street XL mufflers or Pro Street mufflers as part of the standard kit.

Our 3" system uses offset in/offset out because of the sheer size of the tubing and the mufflers in proximity to the driveshaft. This system is only available with Sportsman Street XL mufflers.

ItemDescriptionPrice
 
EX0013" Aluminized system with the Sportsman XL muffler$775
EX001SS3" 304 stainless steel  system with the Sportsman XL muffler$1350.00
EX0023" Aluminized "race system": Includes custom Quad-1 headers, custom extended hook-up pipes (cat delete) and true 3" aluminized exhaust system$1915.00
EX0033" Aluminized "race system" with converters: Includes custom Quad-1 headers, custom 3" ball/socket hi-flow converters and true 3" aluminized exhaust system$2115.00
EX0042 1/2" Aluminized system with Pro Street Mufflers $629.95
EX004SS2 1/2" stainless steel system with Pro Street Mufflers $1050.00
EX0052 1/2" Aluminized system with Sportsman Street XL mufflers$684.95
EX005SS2 1/2" stainless steel system with Sportsman Street XL mufflers$1200.00
EX006Substitute 2 1/2" mirror polished 304 stainless tips  (Without polishing - less $90.00) + $20.00 for 3"$150.00
EX007Mirror polished 304 stainless tips as a stand alone (Without polishing - less $90.00)$220.00
EX008Substitute our resonated tips with slant-cut turn-down. (Aluminized tubing)$175.00
EX009Substitute our resonated tips with slant-cut turn-down. (304 stainless tubing) with mirror polishing. (Without polishing - less $50.00)$275.00
EX017Upgrade to Mirror Polished Tips on stainless exhaust$100.00
S&H is $76.00 - $90.00 for complete exhaust systems.
*All 3" exhaust systems require the use of a tubular transmission cross member for proper clearance.
 Impala SS 3 Inch Stainless Steel Exhaust Resonated Tips

This is our 3" stainless exhaust with resonated tips.

(non-polished) 

 Impala SS 3 Inch Stainless Steel Mirror Polished Tips This is our 3" stainless exhaust with standard tips and mirror polishing.
 Impala SS Standard Clear Image Tips Our 3 inch exhaust with standard aluminized tips.
 Impala SS 3 Inch Stainless Steel Mirror Polished Tips An optional tip design shown with mirror polishing.  These are known as the "BK Tips".
 Impala SS 2.5 to 3 Inch Mirror Polished Tips Our 2.5 inch aluminized system with standard mirror polished tips.
 Impala SS 3 Inch Stainless Steel Balance Pipe Bead Polished Our 3 inch stainless balance pipe with bead polishing.
 Impala SS 2.5 to 3 Inch Mirror Polished Tips An example of our tips from 2.5 to 3.0 inch, shown with mirror polishing.