STS Impala Single Turbo Kit 


 We are happy to announce the completion of our single, rear turbo kit for the 94 - 96 B-body. This is in cooperation with Squire's Turbo Systems, Inc.

Thanks to all of our customers who have shown such an incredible interest, and patience, in this project. We are happy to have brought you all along for the "Clear Image Auto" ride. We look forward to the completion of our STS Impala twin turbo kit very soon.

The kit will be shipped pre-set at 5 PSI. Here are the performance numbers:

325 HP and 360 ft./lbs. of torque to the wheels with the custom tuning, 30 lbs. fuel injectors and Walbro fuel pump installed.

 

System above is shown with our original TRI-Y headers, hi-flow stainless converters, aluminized exhaust and mild steel boost tubing. Powder coating and ceramic coating will be available.

There are two kits, one with mild steel boost tubing and aluminized exhaust tubing and the other with all 304 stainless tubing.

Both kits will include the following:

STS supplied turbo kit
Garret Turbo (application specific)
Tial Wastegate, 38mm
Wiring Harness
Oil Pump
Oil Check Valve
PCV System
Pressure Switch
Instruction Manual

Clear Image supplied kit
1 5/8" waste gate tube
2 1/2" custom exhaust with flex pipe
2" boost tube
3" down-pipe (turn-down from turbo)
3" up-pipe to throttle body
2" silicone fittings
2" band clamps
3" silicone fittings
3" band clamps
2" coated hangers
rubber grommet for temp sensor
oil lines (feed & return)
brass fittings for oil lines
S&B 3" air filter
S&B Service kit
Steel turbo hanger
2 1/2" flex pipe

Steel kit will retail for $3750.00
Stainless kit will retail for $3995.00

Performance Options are:
30 lbs. SVO fuel injectors -$330.00
Walbro 255 Fuel Pump - $115.00
TriFecta tuning - $250.00

Dress-up options:
Mirror polished 304 stainless up-pipe to throttle body - $75.00
CHROMEX ceramic coated up-pipe to throttle body - $65.00
Powder coated up-pipe to throttle body - $55.00
Carbon fiber up-pipe to throttle body - $175.00

For those customers in a wet climate where the filter location may be prone to water, we have fabricated a "DRY" kit. Here are the R&D pictures of the cold air intake going to the turbo as well as the 3" down-pipe/over-axle exhaust option.  As you can see, with both options chosen, the car looks like it has nothing but a dual 3" exhaust system. More pictures coming soon as we progress to production parts.   Please keep in mind these pictures are of very rough parts.

The combination over-axle down-pipe, cold air intake with "dry" filter and dual 3" tips adds $400.00 to the kit. To up-grade to 304 stainless steel, add $200.00.  To really give your car a sleeper look with mirror polished tips, add an additional $125.00.